MOTOGADGET MOTOSCOPE PRO DASHBOARD

MOTOGADGET MOTOSCOPE PRO DASHBOARD

The motoscope pro is the most recent generation of motogadget's digital dashboard series. The instrument is equipped with an ABE and does not have to be registered. Cutting edge technology enables us to create ultra-slim casing designs. 734 LEDs - governed by a 16-bit RISC processor - create an almost rimless, self-illuminating display matrix. It provides optimal readability even under conditions of direct sunlight. Automatic brightness control is a matter of course. The rev-counter is displayed fully scalable via the analogue LED band with drag indicator function. Main and secondary display are user configurable. Another display section shows the gear currently engaged.Four indicator lights are pre-installed and can be used for far more input signals via the Breakout Boxes. The motoscope pro is equipped with a fully-fledged CAN-bus interface and thus ready for many of tomorrow's developments like for example the plug 'n ride Breakout-Box Triumph (please see tab 'Triumph' above).The dashboard communicates over a proprietary digital one-wire bus (m-Bus) with additional Breakout Boxes to easily expand the application spectrum. This makes the dashboard highly versatile and makes application to a wide range of vehicles and tasks possible.The billet aluminium casing is cnc-machined and is easily mounted by two backside threaded holes. Specifications and Features:Length, Height, Depth: 109 mm/ 47 mm/ 11 mmWeight w/ cable: ca. 100 gMounting: 2 x M3 threaded holePower consumption during operation: max. 200 mA (load dependent)Power consumption in standby: 0.4 mAOperating voltage: 9 V - 15 VOperating temperature: -20° +80°CRev counter (LED bargraph) = 0 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)Speedometer = 0 350 km/h or mphTrip meter A & B = 999.9 km or miTotal mileage (adjustable) = 250000 km or miOperating hours/Service = 0 9999.5 hClock = 23:59 h/minTimekeeping = 0 99:59:59 h/min/sRPM count (on LCD) = 0 20000 rpmAdjustable RPM warning (gear shift flash) = 0 20000 rpmOn-board voltage = 9 18 VLow voltage warning = Warning if below ca. 11VTimekeeping = 0 - 100 km/h or 0 - 60 mph 0.00 30.59 sec.Actual accelleration = +/- 0.00 1.50 GAverage speed = 0 350 km/h or mphMax. speed = 0 350 km/h or mphMax. RPM = 0 20000 rpmMax. positive acceleration = +1.50 GMax. negative acceleration = - 1.50 GGear display = N, gear 1 - 6Green control LED (w/ breakoutbox A/B) = Neutral (N)Green control LED (w/ breakoutbox A/B) = Turn indicator left/rightblue control LED (w/ breakoutbox A/B) = High beamRed control LED (w/ breakoutbox A/B) = Miscellanious warning funktionsFuel/Reserve (w/ breakoutbox A/B) = 0 - 100% w/ low warningAir temperature* (w/ breakoutbox B) = -20 - 80 °C / -4 - 176 °F w/ high/low warningWater temperature* (w/ breakoutbox B) = 40 - 120 °C / 104 - 248 °F w/ high/low warningOil temperature* (w/ breakoutbox B) = 40 - 150 °C / 104 - 302 °F w/ high/low warningOil pressure* (w/ breakoutbox B) = 0 - 8 bar / 0 - 116 psi w/ high/low warningDelivery contents: motoscope pro with ca. 55 cm connector cablespeedometer sensor M5 x 0,5 fine-pitch thread (stainless steel, IP67) with ca. 150 cm connector cable2 magnets10 cable end connectorsin-line fuse2 stainless steel screwsdetailed installation and operating instructionsNote:Touch sensor not included anymore.Please order the Breakout Box to connect indicator light signals (see Breakout Box Std.) or to connect digital bus-systems (Triumph, H-D) additionally. For BMW R9T a Breakout Box is not necessary.