MOTOGADGET MOTOSCOPE PRO BMW R9T DASHBOARD

MOTOGADGET MOTOSCOPE PRO BMW R9T DASHBOARD

The motoscope pro BMW R9Te only plug&ride instrument on the marketThe CAN-Bus interface of the motoscope pro enables the complete display of all original functions (except settings for heated grips). The original plug connector for the original wiring loom makes the instrument a real plug&ride solution and a very easy installation.A LED matrix display enables an ultra thin housing design. 734 LEDs, controlled by a 16-bit RISC processor - create an almost rimless, self-illuminating display. It provides optimal readability even under conditions of direct sunlight. Automatic brightness control is a matter of course. The rev-counter is displayed fully scalable via the analogue LED band with drag indicator function. Main and secondary display are user configurable. Another display section shows the gear currently engaged. Four indicator lights are pre-installed and can be used for far more input signals.The billet aluminium casing is cnc-machined and is easily mounted by two backside threaded holes. The instrument is equipped with an ABE approval.Specifications and Features:Length, Height, Depth: 109 mm/ 47 mm/ 11 mmWeight: appr. 100 gMounting: 2 x M3 threaded holePower consumption during operation: max. 200 mA (load dependent)Power consumption in standby: 0.4 mAOperating voltage: 9 V - 15 VOperating temperature: -20° +80°CRev counter (LED bargraph) = 0 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)Speedometer = 0 350 km/h or mphTrip meter A = bis 999.9 km or miTrip meter B = bis 999.9 km or miTotal mileage (adjustable) = bis 250000 km or miOperating hours/Service = 0 9999.5 hClock = 23:59 h/minTimekeeping = 0 99:59:59 h/min/sRPM count (numerical) = 0 20000 rpmAdjustable RPM warning (gear shift light) = 0 20000 rpmOn-board voltage = 9 18 VLow voltage warning = Warning if below ca. 11VTimekeeping = 0 - 100 km/h or 0 - 60 mph 0.00 30.59 sec.Actual accelleration = +/- 0.00 1.50 GAverage speed = 0 350 km/h or mphMax. speed = 0 350 km/h or mphMax. RPM = 0 20000 rpmMax. positive acceleration = +1.50 GMax. negative acceleration = - 1.50 GGear display = N, gear 1 - 6Green control LED =Neutral (N)Green control LED = Turn indicator left/rightblue control LED = High beamRed control LED = Miscellanious warning funktions like Check Engine, ABS, low fuelFuel/Reserve = low fuel warningParts delivered:motoscope pro with ca. 70 cm connector cable2 stainless steel screwsdetailed installation and operating instructionsPlease note:Touch sensor not included anymore, BMW Alarm System may not work with motoscope pro installed, Heated-Grip-Control may not work.